Types of Lumber: The Basics

Types of Lumber: The Basics

Are you looking to start up a woodworking hobby? Perhaps you’re doing some investigating before you start planning to build your own home. Here’s an overview of the different types of lumber out there from E.L. Morse Lumber to get you started on the right track.

Softwood and Hardwood Types of Lumber: The Basics

Different types of trees produce different softness or hardness in the lumber made from them. Coniferous trees, ones with needles like pines, firs, and spruces, usually have softer wood. They’re soft enough to splinter and break from a person’s bare hands, and have to be specially treated over time. It’s interesting that these rough-on-the-outside trees produce softwood lumber, while trees like maple and mahogany produce more stiff, resilient hardwood lumber. Hardwood trees take longer to grow, which is one of the reasons why the wood is so much more expensive.

Classifications of Lumber Types of Lumber: The Basics

All it takes is a glance out your backdoor to see that trees don’t all look the same, even when they’re the same type of tree. So it is with lumber. Not all pine trees will produce the same kind of lumber, which is why they are classified for different uses depending on their characteristics.

Yard Lumber

Yard lumber is one use of softwood, and it’s used in regular construction projects. Depending on the quality, yard lumber comes in different grades: common and select. There’s a no. 3 common, a no. 2 common, and a no. 1 common, 1 being the highest quality grade of common lumber. This highest grade will have a few small, tight knots in it. No. 2 has larger knots and works well in paneling or making shelves. No. 3 has the biggest knots, and does better in fencing or making crates. Select yard lumber has very few to no knots in it at all. The fewer defects in the wood, the higher the select yard lumber grade.

Structural Lumber

Then you have structural lumber. This type of lumber is what a standard 2×4 or 4×4 is made of. It’s typically tested to see how well it will stand up to stress, and different stress grades are used for different purposes. Structural lumber is a diverse material that can be used in a wide variety of accent areas throughout a building. Light framing and structural light framing are done with this type of lumber. Structural joists and planks, as well as beams and stringers, are made up of this lumber type as well. Then you have studs, posts and timbers, and appearance framing at the very end of it all to give it a polished look.

Shop Factory Lumber

Then there’s shop factory lumber, the type of wood that isn’t meant for building large structures. This is the kind of lumber you’re looking for to build doors, pencils, ladders, or any other hodgepodge items that require wood to be manufactured.

The kind of lumber you use is directly in correlation with the kind of work you’re doing. If you’re looking for a bid on your next project, it’s a good idea to get a quote from a lumber company such as E.L. Morse Lumber to get an idea of your costs

The equipment is mostly needed by a horse owner

The equipment is mostly needed by a horse owner

With the ever-increasing range of horse equipment available on the market we have a look at the essentials that every horse owner should have.
Well other than the horse your first thing you need is a halter. The continental design is the best as it allows for the use of a chain. Most halters manufactured today are continental in design. Extra features include safety clips (they are important if you intend turning your horse out with a halter on) lining for the nose and poll. Which one you select will largely depend on your budget and taste, as they are available in almost every possible.

 

Next you will need a lead rope, a thicker softer lead rope is advisable, and if it has a loop on the end cut it off or loosen it, lead reins should never have a loop at the end. Ideally a lead rein should measure between 5-7 feet in length, as they are the most versatile

Spare feeder and water bucket even if your horse is boarded it is yours. It is advisable to have at least two hay nets as well

Grooming kit also advisable to have two of if possible allowing for changeover and cleaning without interrupting the grooming routine. Mark your hoofpick well, as it is usually the first thing to wander off in any yard. Invest in a few spares.

Two working bridles, it is advisable when buying a horse to bridle (unless it’s a Keiffer or Stubben that is) Buy a spare bridle and oil it is well to have available in the event of the working bridle breaking

Working boots Brushing boots is advisable for everyday riding, unless your horse requires specialized boots, which you will be informed of when purchasing, or after having the horse vetted. Speak to your stable manager or instructor as to the most suitable boots.

Saddle a well-fitted saddle that’s your choice and riding style. Check your saddle every three months to ensure it’s correct fit.

Rugs and clothing Day sheet, used mostly after bathing a horse to get the coat to lie flat, of for traveling.

Sweat sheet used to cool your horse down and prevent chills on cool or cold days. Often confused with a flysheet, a sweat sheet has the same appearance as a flysheet. It is however heavier and does not have the belly straps

Flysheet if you own a gray horse or one with sweet itch this should be placed on horses whilst turned out to prevent insect bites and stings.

Exercise blanket. If your horse is to be clipped in the winter and it snows in your area warm whist working.

Rugs Depending on your stabling arrangements and climate may require up to three rugs. If stabled your horse could have a lighter duvet rug whilst indoors, and then have this exchanged for a New Zealand or Weatherbeta for when turned out. It is advisable to have at least two turnout rugs should you have wet winters with snow, as this allows for them to dry properly prior to being used on the horse again.

Should your horse live out at least two New Zealand rugs. Ensure that the waterproof lining is intact and not allowing moisture to seep through.

Bandages Exercise bandages, these are made of elastic or ribbed fabric, although not as fashionable as boots, horse exercise bandages have one benefit over boots. Used to protect the legs whilst in work and to support tendons. Also helps with beeping the legs warm in the winter.

Stable bandages These are made of wool of flannelling, today they are often made of fleecing. Every owner needs at least one pair on stable bandages; These are used from bandaging for warmth or for drying of legs to extra support for wound horse dressings.

How to Prepare Your Vehicle for Long-Term Storage

How to Prepare Your Vehicle for Long-Term Storage

Putting a car into long-term storage in Palo Alto can cause problems if you don’t prepare it correctly. Your car was designed to be driven, and letting it sit idle for months at a time can easily cause it to break down. Follow these steps to make sure your car is in top condition when you take it out of storage.

Change the Fluids

How to Prepare Your Vehicle for Long-Term Storage

Change the oil, brake fluid, and coolant just before putting your car into storage. Fill up your gas tank with a high-quality gasoline. These fresh fluids help keep your car lubricated and prevent corrosion. If you’re going to store your car for a long period of time, use a fuel stabilizer to prevent the gas from deteriorating.

Disconnect the Battery

Your battery will gradually lose power over time if you’re not driving your car. Disconnecting it is an easy way to prevent this from happening. Or, if your storage unit has electricity, you can hook your battery up to a trickle charger that will supply it with just enough energy to stay charged.

Prop Up Your Tires How to Prepare Your Vehicle for Long-Term Storage

Storing your car for months at a time in the same position puts quite a bit of strain on your tires. Inflate your tires to their recommended pressure or a little bit higher before storing your car. If possible, drive your vehicle at least once every 1-2 weeks to more evenly distribute the pressure. If you can’t get out to drive your car, prop it up on jacks or remove the tires altogether.

Clean Your CarHow to Prepare Your Vehicle for Long-Term Storage

When dirt collects in yo ur car, it makes it break down faster. It also attracts rodents and insects that can further damage your vehicle. Clean your car thoroughly inside and out before putting it into storage in Palo Alto, and use a cover when it’s inside the unit to keep out the dust and pests.

3 Reasons to Hire a Pool Service Company

3 Reasons to Hire a Pool Service Company

Having a pool can be very fun for the whole family. Until the pool needs to be cleaned up, and then it can be a nightmare. Many homeowners will hire professional companies like Andy’s Pool Service to cope with its complexity. Hiring a full service company will include everything that a pool might need.

Cleaning and Chemistry 3 Reasons to Hire a Pool Service Company

One of the most feared parts of having a pool is keeping it during the swimming season. This is a constant battle to empty the bottom of the pond and glide to the surface of the water. Once the water is clear of debris, the chemical level needs to be checked for clear water. The technician will not only check the chlorine levels, they will check the pH level to make sure the swimming pool is safe for swimming. They will even make sure there is enough water in the pool to make sure all the equipment is running properly.

Equipment Maintenance 3 Reasons to Hire a Pool Service Company

Along with cleaning the pond water, the technician will clean the filter and other parts of the cleaning system. They will remove the filter cartridge and rinse it or replace it if necessary. All skimmer baskets will be removed and rinsed as well. They will not only clean up different parts of the equipment, they will check it for signs of wear and replace it before they break up.

Repairs or Renovations

During weekly cleaning, technicians will also check the general condition of the pool structure. They will check the sides for signs of cracking or peeling. Stairs and rails will be checked for robustness. They will check the tiles loose or trim as well. At the end of the season they can light a pool washbasin and clean the sides and bottoms after they have been dried. They can also use acid-washers at the pool and bottom to remove algae that have begun to form in the pond. They can also give facelift swimming by changing the color of the surface or even using new materials.

Many pool owners will look to companies like Andy’s Pool Service in advance when they need new equipment or even a new pool. Technicians will work with various companies that produce swimming pool equipment and even pool builders. They can give a broad opinion about each type and help compare and contrast to find the best for homeowners situation.

Here’s What To Do When Your Emergency Fund Runs Dry

Something happens, and sometimes we lack the money needed to get through it. Here’s what to do if your emergency fund is lacking but you need funds.
We all like to think that everything is stable and secure. But sometimes, life throws a very difficult situation for us.

It always happens.

An unexpected emergency emerged. You lost your job You have to pay a medical bill suddenly. Your car is damaged and you need an expensive car repair.

This type of event can easily put you in financial ties. If you do not have an emergency fund, it can be very stressful, is not it?

If you find yourself in financial ties and you need to raise funds quickly, it can be done. This post will give you some tips that can help you earn money quickly.

Home Equity Line Of Credit
If you own your home, the home equity line of credit may be a good solution. It’s an easy way to make quick money.

However, it is important to remember that you use your home equity as collateral. You need to make sure you can make payments, otherwise you could lose your home. Be careful with this one.

Credit Card with Low Interest
If you do not want to bear the debt, it’s perfectly understandable. Debt can be a financial turmoil. But if you have no other choice, this can help in your current difficult circumstances.

Keep in mind that there may be a problem with qualifying for low interest credit cards depending on the nature of your emergency. It might be a good idea to file a card when things go well. This is a good way to have a “guarantee” if an emergency arises.

Pay the loan
Payday loans may be a good way to earn cash if you can not wait until you get paid. However, make sure you take stock of your choice before you decide to get a payday loan. You may be able to get a loan from a bank, and the price may be slightly reduced. Payday loans are known for high interest rates.

You need to be wary of fraud if getting a payday loan. Make sure you research the company you are dealing with before signing an agreement. Also, pay close attention to the loan agreement. You need to know exactly what you approve before signing it.

Side Hustle
There is nothing wrong with the little sides of the crowd. If you have certain skills or talents that you can sell, take full advantage of them.

There are many ways to make extra money at home. Find some ways to make extra money on the side. This is a good way to build savings even if you are not in an emergency.

Selling Multiple Belongings
Sometimes, it might be a good idea to sell some of your things. Especially if you have some stuff you do not need anymore. Furnishings, old computers, video games, and clothes are things people can buy.

There are several sites that you can use to sell things. EBay and Craigslist are some of the most popular.

Conclusion
When you are bound, you need to do what you have to do. Financial emergencies are not easy for anyone. But some tips in this post will help you get out of your difficult situation. Take a look at LittleLoans for more information – they are a great additional source.

Puerto Rico is still mostly without electricity

Puerto Rico is still mostly without electricity
Six weeks after Hurricane Maria, the head of the Army Corps of Engineers predicts another two to three months before the Puerto Ricans have power restored

Lt. Gen. Todd Semonite, the head of the Army Corps of Engineers, predicts it will be two or three months before most Puerto Ricans regain power in their homes. The vast majority of people in the U.S. territory have gone without it for over six weeks since Hurricane Maria directly hit the Caribbean island. Lt. Gen. Semonite speaks to Steve Kroft for a report on the current conditions in Puerto Rico and the outlook on its recovery to be broadcast on 60 Minutes Sunday, Nov. 5 at 7:30 p.m. ET and 7:00 p.m. PT.

Lt. Gen. Todd Semonite, the head of the Army Corps of Engineers CBS NEWS
Some Puerto Ricans living on the very ends of the electric grid may wait until spring or summer before they get their power back, warns Semonite. “The last mile is going to take a long, long time … probably 62,000 power poles that have to be brought in from the United States, that has to go 6.100 miles of cable , “he tells Kroft. “The science and the engineering and the logistics to be able to make it happen is just going to take some time,” says the general.

“We’re going to push like heck,” says Semonite, “I think the majority of people will hope to have their power up in January, maybe February. to spring or summer before they get them very, very last houses, “he says.

60 Minutes spent over a week reporting in Puerto Rico. Kroft also spoke to Puerto Rico Gov. Ricardo Rossello, Mike Byrne of FEMA and to retired FBI Agent Hector Pesquera, a Puerto Rican native who is directing emergency services and public safety on the island.

Pesquera says the Puerto Rican people, who are U.S. citizens, are owed a return to “some sense of normality.” “What happened here is that within a 24-hour period, life as we know it on the island just collapsed,” he tells Kroft. “There is no food.” There is no gasoline … There is no water.

NUCLEAR IN THE FIELD OF MEDICINE AND HEALTH

NUCLEAR IN THE FIELD OF MEDICINE AND HEALTH
The 20th century marked a remarkable development in science and technology, including medical and healthcare disciplines and technology. This important breakthrough in science and technology makes an invaluable contribution to the diagnosis and treatment of diseases including diseases that are becoming more important epidemilogically as a logical consequence of development in all areas that have improved socioeconomic conditions of society.
The use of radioactive isotopes in medicine was started in 1901 by Henri DANLOS who used radium for the treatment of tuberculosis in the skin. But what is considered the father of Nuclear Medicine is George C. De HEVESSY, he is the principal  tracers using radioactive substances. At that time he used natural racaineotopes Pb212 .. With the discovery of artificial radioisotopes then natural radioisotopes are no longer used. An artificial radioisotope widely used in the early days of the development of nuclear medicine is I131. However, its use has now been pressed by Tc 99m in addition to its ideal nature in terms of protection and image formation can also be obtained easily and relatively cheap price. However, I131 is still indispensable for diagnostics and therapies, especially thyroid cancer gland.
The rapid development of nuclear medicine is possible thanks to the support of the development of instrumentation technology for image creation, especially with the use of computers for data processing, so that the first instrumentation system used only ordinary radiation detectors with simple electronic systems, has now developed into advanced gamma camera equipment and Positron camera that can display the image of the body tool, either two-dimensional or three-dimensional as well as static or dynamic. Today, the application of nuclear power in the field of health has made an invaluable contribution to the diagnosis and treatment of various diseases. Various medical disciplines such as internal medicine, neuroscience, cardiology, and so forth have benefited from this nuclear technique. NUCLEAR MEDICAL The medical science of   is a branch of medical science that uses an open source of radiation derived from the disintegration of artificial radionuclide nuclei, to study physiological, anatomical and biochemical changes, so that it can be used for diagnostic tangi, therapy and medical research. In nuclear medicine, radioisitop can be inserted into the patient’s body (study in-vivo) or simply reacted only with biological substances such as blood, gastric fluid, urine and so on, taken from the patient’s body better known as in-vitro studies glass experiment).

NUCLEAR IN THE FIELD OF MEDICINE AND HEALTH

In the in-vivo study, after radioisotopes can be inserted into the patient’s body by mouth or by injection or inhaled through the nose and so the information that can be obtained from the patient can be:
1 An image or image of the patient’s organs or body parts may be obtained with the aid of a device called a gamma camera or a positron camera (imaging technique).
2 Radioisotope kinetics curves in certain organs or parts of the body and figures that describe the accumulation of radioisotopes in certain organs or parts of the body in addition to images or images obtained with positron cameras.
3 Radioactivity contained in biological samples (blood, urine, etc.) taken from the patient’s body, chopped with instruments coupled to a radiation detector (non-imaging technique). Data obtained both with imaging and non-imaging techniques provide information on the function of the organs being examined. The imaging of nuclear medicine in some hass differs from that of radiologist. (table 1) In the in-vitro study, from the patient’s body was taken a certain amount of biological material eg 1 ml of blood. Such biological material excerpts are then reacted with a substance that has been marked with radioisotopes. Examination is done with the aid of a gamma radiation detector coupled with an instrumentation system. Such studies are usually done to determine the content of certain hormones in the blood of patients such as insulin, thyroxine and others. The examination of nuclear medicine helps a lot in supporting the diagnosis of various diseases such as coronary heart disease, coronary disease

NUCLEAR IN THE FIELD OF MEDICINE AND HEALTH

5 Type Of Firefighter You Should Know

5 Type Of Firefighter You Should Know

 

Every year, fires cause billions of dollars in property damage. To protect yourself from unintentional fires, a working fire alarm system is a must.

However, you should also invest in a fire extinguisher. Portable fire extinguishers can save your treasure – and life. They can be used to hold small fires.

If a fire occurs in your home or office, do you know which fire extinguishers to use? Did you know that there are several types of firefighters?

Keep reading for information on the most common types of firefighters.

5 Must-Have Types of Fire Extinguisher
There are five classes of fire, and hence there are five different types of firefighters. You can check labels on fire extinguishers to determine the type.

At home and office, you will often find multi-purpose extinguishers.

Knowing which material causes the fire is useful when choosing the right firefighter.

Here are five types of firefighters.

1. Type A – Ordinary Combustibles 5 Type Of Firefighter You Should Know

A type A extinguisher has an “A” on the label inside the green triangle. This extinguishers work on combustible fires caused by:

Wood
Paper
Trash
Fabric
Rubber
Plastic
The main chemical used is monoamonium phosphate, which will extinguish the fire.

Type B – Flammable liquid

This extinguisher is marked with a “B” box in the red box. Dealing with flames caused by flammable liquids? If so, you need a type B extinguisher.

Fires that have been ignited because of oil, gasoline, paint or tar require two materials to extinguish it. B type extinguishers use monoammonium phosphate to extinguish the fire. Then, they use sodium bicarbonate to extinguish it.

3. Type C – Electrical Equipment 5 Type Of Firefighter You Should Know

The extinguisher with C inside the blue box is for fire electrical equipment. This type of fire can be caused by:

Machine
Device is corrupted
Cable
Circuit breaker
Fuse box
Since these items have electricity passing through them, non-conductive materials are a necessity. Type C extinguishers use monoammonium phosphate and sodium bicarbonate.

4. Type D – Flammable Metals

A D type extinguisher is identified by marking the “D” mark in a yellow star. Flammable metals create different fire threats.

Use a Type D extinguisher to extinguish a fire that involves:

Titanium
Zirconium
Potassium
Sodium
Magnesium
Lithium
Because the metal is flammable, dry powder material should be used. This extinguishers are not effective on other fire classes.

Type K – Cooking is flammable

K type fire extinguishers are labeled “K.” black.

It handles fires involving large amounts of oil, including animal and plant fats. This type is most commonly used in kitchen fireplaces.

Do you need more heavy fire extinguishers? If so, contact a professional company like Cold Fire Tactical.

A return trip aboard “Murder on the Orient Express”

A return trip aboard “Murder on the Orient Express”

The Sidney Lumet movie “Murder on the Orient Express” was a huge hit back in 1974. This morning, with Seth Doane as conductor, we have a ticket to a remake:

Whether it’s the baby grand piano, white table-cloths and fine china, or the art-deco details, it’s clear this is no ordinary train. It’s the Venice-Simplon Orient Express, made up of historic 1920s carriage reminiscent of the legendary train dating back to the 1800s, which transported passengers between Paris and Istanbul in very high style.

“It is incredible,” said James Pritchard. If his name is not recognizable, his great-grandmother’s certainly is: Agatha Christie.

“I probably feel as close to my great-grandmother at this point as I ever have,” Pritchard said. “You can feel what she must’ve felt.

An avid traveler, Christie was a regular on the Orient Express, which she called “the train of her dreams.”

Author Agatha Christie. PA WIRE / AP
No wonder it was the setting for her most famous tale of murder.

Pritchard said, “I think when you walk along these carriages you can imagine the way of life. .You can kind of see how her imagination is developed. ”

Christie’s imagination and ability to paint pictures of her novels, 150+ short stories, and more than 20 plays.

Perhaps none is more beloved than “Murder on the Orient Express.” It has been told and re-told several times. Kenneth Branagh directs and stars in the latest film adaptation.

“She’s such a master at laying out, in this case, very, very fascinating, interesting group of characters,” Branagh said.

That made Branagh’s job of directing and casting the film all the more interesting.

He may be a towering figure in Hollywood, but he was dwarfed next to the hulking train he had built for his movie. “We want it very much to be away from friendly trains, you know, the world of Thomas the Tank Engine and all the rest of it,” Branagh said.

Selecting the Right End Profile

Selecting the Right End Profile

When the time comes to remodel your kitchen, one of the biggest decisions you should make is what to use for your counter boss. Butcher blocks, laminate, granite, marble, and counter quartz counters are just a few of your choices at Johns Creek. Each has its own advantages and disadvantages, including price and durability. Once you select your top counter, you will need to choose what you want to crawl like. Choosing an edge profile can be almost as difficult as choosing a counter top, so let’s look at the options.

Eased Edge – The subsiding edge is the bottom edge which has only a dull sharp angle to give it a smooth, rounded edge. It is usually supplied with a counter over charge.
Bevel – The beveled edge will have a 45 degree viewing angle across the top edge of the counter. You can usually choose from a variety of sizes, such as quarter inch or half inch. A smaller size will often be a free option while a larger bevel may be additional. Selecting the Right End Profile
Bullnose – The bullnose edges are completely round from top to bottom. Instead of a tight curve, a full bullnose will create a slow and gentle drug from the top of the table to the bottom. The other option is a half bullnose, which just circles the top edge and not the entire edge. Both of these options are generally additional costs due to the work required.
Ogee – Ogee is probably one of the most complicated ends for your desk. This is a gentle slope that is hard to describe without pictures. French Ogee is even more complicated and has a more straightforward part to give the impression of luxury that can certainly distinguish your boss. This edge will always incur additional costs, especially for stone counters, due to the labor required to create them. Selecting the Right End Profile

 

Choosing the right edge profile for the new counter tops is just as important as choosing the top right counter by yourself. Whether you decide on a butcher block or quartz counter counter at Johns Creek, your next decision is the tip. A top counter professional will be able to walk you through the process and show examples of each type of counter and edge. They will make sure that you get the best top profile and the best edge for your home. Selecting the Right End Profile